| |
 |
•
Electro-Mechanical Broadband RF Switch.
• Single-Stage Driver Amplifier
•
Quad-Band EDGE Radio Solution
• Modeling
3G / WCDMA / HSDPA
• Composite Filters
• Integration of Waveguide
•
Coaxial Components
• Antennas Needed
• And More... |
|
|
|
|
 |
 |
| |
 
 Voltage Controlled Oscillator
The CVCO55CC-0787-0805 VCO operates from 787 to 805 MHz with a control voltage range of 0.3 ~ 4.7V. It features a typical phase noise of -122 dBc/Hz @ 10 KHz offset, has excellent linearity, and comes in the industry standard 0.5 x 0.5" SMD package.
 GPS L1 Ceramic Filter
DR-1575/50 is a ceramic filter that covers the GPS L1 frequency of 1575.42 MHz. The filter exhibits less than 3.5 dB of insertion loss across the passband of 1550 to 1600 MHz while providing greater than 50 dB of rejection at 1475 and 1675 MHz.
 Sub-Miniature VCO
The SMV2165A-LF in S band (2118 to 2218 MHz) is a sub-miniature VCO featuring typical ultra low phase noise of
-90 dBc/Hz @ 10 kHz offset. The design has a tuning sensitivity of 148 MHz/V (typ) and provides an output power of 6 +/-3 dBm.
 Receiver Frontend
Model RFE-218-70-BB is a 2.0 to 18.0 GHz direction finding receiver frontend. The minimum dynamic range of the subsystem is -60 to +5 dBm while the input VSWR in frequency range is 3.0:1 and the frequency flatness at the outputs is +/-3.0 dB maximum.
 SP32T Switch with Decoder
This port to port phase matched SP32T switch, model MSN-32DT-05-DEC-MP with options 100M20, PM10, operates within the 100 MHz to 20 GHz frequency range. It has an amplitude balance of +/-1.2 dB maximum, and is phase matched to +/-10º maximum.
 Oscilloscope
The Infiniium 9000A Series 13-GHz oscilloscopes have been approved by the PCI-SIG (PCI Special Interest Group) for PCI Express® 2.0 electrical signal quality testing. This approval means designers can use the DSO/DSA91304A Infiniium oscilloscope to test and validate their designs that will meet PCIe physical layer specifications.
 C-Band CRO
Model CRO5700Z in C band (5690 to 5719 MHz) uses a doubler inside and features ultra low phase noise performance of -106 dBc/Hz @ 10 kHz offset. It is ideally suited for digital radio applications that require ultra low phase noise performance.
 M8 to M12 Connector Adapter
The Series 765 automation connectors now has a M8 to M12 connector adapter, which allows the connection between M12 and M8 cordsets. The small IP67-rated adapter has a M8 male cable connector and a M12 female cable connector.
 Directional Couplers
These miniature air dielectric directional couplers are rugged lightweight devices that offer lower insertion loss than comparable stripline units. The simplified construction allows for greater flexibility in creating customized configurations.
 LFTS Synthesizer Series
The LFTS Series of low phase noise synthesizers offer state-of-the-art high resolution frequency sources for INTELSAT applications. It comes with standard 100 Hz step sizes and provides an additional output that may be used as the second conversion LO for dual conversion up and downconverters.
 Ultra Broadband Bias Tee
Model BT-10M18 is a bias tee that is designed to operate from 10 MHz to 20 GHz. The insertion loss is 1.5 dB maximum at 20 GHz, 20 dB of isolation from 10 to 300 MHz and 30 dB from 300 MHz to 20 GHz with a VSWR of 2.0:1 maximum.
 Transfer Switches
The TA/TD Series of transfer switches features SMA connectors and a frequency range of DC to 18 GHz. The TAE/TDE Series also features SMA connectors and a frequency range of DC to 26.5 GHz. Both are available with failsafe, latching self cut-off, or pulse latching functions.
|
|
|
 |
|
|
| |
 |
| |
|
1X |
3X |
6X |
12X |
18X |
24X |
36X |
48X |
| |
Tab Page |
$5,671 |
$5,258 |
$4,935 |
$4,673 |
$4,481 |
$4,318 |
$4,190 |
$4,072 |
| |
Std Sprd |
6,789 |
6,528 |
6,176 |
5,893 |
5,533 |
5,511 |
5,374 |
5,243 |
| |
Std Page |
4,177 |
4,009 |
3,798 |
3,626 |
3,499 |
3,392 |
3,304 |
3,225 |
| |
2/3 Page |
3,178 |
3,056 |
2,883 |
2,753 |
2,659 |
2,577 |
2,511 |
2,453 |
| |
1/2 Page |
2,587 |
2,486 |
2,358 |
2,250 |
2,166 |
2,102 |
2,045 |
2,002 |
| |
1/3 Page |
1,965 |
1,881 |
1,781 |
1,703 |
1,647 |
1,591 |
1,552 |
1,519 |
| |
1/4 Page |
1,567 |
1,509 |
1,429 |
1,360 |
1,319 |
1,278 |
1,250 |
1,213 |
| |
1/6 Page |
1,228 |
1,179 |
1,117 |
1,061 |
1,027 |
1000 |
967 |
939 |
| |
| |
|
 |
| Standard 4-A red, blue, green or
yellow |
Included in above rates |
|
|
| 4/C process |
Included in above rates |
|
|
|
|
|
Above color charges do not include cost of
space. Rates apply to tab, standard size or fractional ads.
General Conditions
Publisher reserves the right to reject any advertising which
he feels is not in keeping with the standards of the publication.
The publisher assumes no liability for errors in content,
Reader Service numbers or advertisers index. The publisher
is not responsible for any errors or omissions that occur
in advertisements or the omission thereof.
Publisher's Copy Protective Clause
Advertisers and advertising agencies assume liability for
all content (including text, representation, and illustrations)
of advertisements printed, and also assume responsibility
for any claims made against the publisher arising therefrom.
Advertising materials and artwork will be destroyed after
one year unless advertiser notifies publisher in writing
that material is to be returned. MPD does not return CDs.
Photos and other reproduction materials for On The Market,
Literature and Marketplace sections are not retained on
file.
Short Rates and Rebates
Advertisers will be short rated if, within a 12-month period
from the date of first insertion, they have not used the
amount of space upon which their billings are based. Advertisers
will be rebated if, within a 12-month period from date of
first insertion, they have used sufficient additional insertions
to warrant a lower rate than that at which they have been
billed.
Commission
15% of gross billing allowed to recognized advertising
agencies on space, provided account is paid within 30 days
of invoice date.
Bleed
No Charge.
| Covers |
|
| Front Cover |
Not sold |
| Second Cover |
20% premium |
| Third Cover |
15% premium |
| Fourth Cover |
25% premium |
Inserts
Black and white page rates apply. Inserts must be furnished
untrimmed and must allow for saddle-stitch binding. Maximum
weight: 80 pound cover or 100 pound coated stock. Allow
1/8 inch trim all around.
Trim size: 9-3/4 x 13-3/8 inches.
Contact publisher on inserts of four or more pages and mailing
information.
Issuance and Closing Dates
Issued monthly on or about the 12th of each month. Closing
date for orders is the 10th of the month preceding issue.
In the event the 10th falls on a holiday, Saturday or Sunday,
the closing date will be the following business day. All
cancellations must be received in writing in the N.J. office
no later than 5:00 PM, EST on the business day preceding
the closing date for orders. Cover and/or preferred position
contracts and/or orders are non-cancellable. Orders and
material from Asian countries must be in the publication’s
NJ office five days prior to the closing dates.
|
Display
Advertising Rates | Special
Supplements | Rate
Card (Print)
Mechanical
Requirements and Deadlines
|
|
